Vegetable Trimming Machine 1500 kg/h

Alignment and trimming unit that cuts tops and tails from carrots, radishes and similar root vegetables at line rate before peeling or cutting.

SKU: VL-052 Category: Tag:

Vegetable Trimming Machine

Vegetable trimming machine cutting tops and tails from root crops

Trimming machine that orients root vegetables and cuts the top and tail to a set length, so that product enters peeling, cutting or packing at a consistent size.

How it works

Product is singulated into lanes on a vibratory feeder or a belt with guides. Each lane carries pieces into a pair of rotating cutting heads or past fixed knives positioned at the trim length; the knives remove the top and the tail as the piece passes. Trim length is set by knife position or by the spacing between the cutting heads. Offcuts fall away separately, and trimmed product discharges to the next stage.

Orientation is the constraint: a trimmer can only cut a consistent length on product that is presented consistently. Crooked or forked roots trim short, and that shows up as yield loss rather than as a jam.

Suitable for

Carrots, parsnips and radishes before peeling or slicing; baby carrot production, where trim length is the product specification; beetroot and turnips; cucumbers and similar elongated product; lines that currently trim by hand and want the labour out.

Not suitable for

Round or irregular product with no consistent axis; heavily forked or curved roots, which trim unpredictably; product where the top is the saleable part; very small product that cannot be held in the lanes.

Material & compliance

Knives, guides, lanes and frame in SUS304 (EN 1.4301); knives in hardened stainless or tool steel with replaceable edges. Guards interlocked over the cutting heads; offcut chutes arranged for separate collection; contact parts removable for washdown.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Bring your own product to a trial — trim yield on curved roots cannot be predicted from a drawing, and a few percent of yield on a root crop line is real money. Ask how many lanes the machine has and what happens to a lane that jams. Check knife access and sharpening interval, since dull knives tear rather than cut and damage shows up downstream as poor appearance.

When you should not buy this machine: If your raw material is ungraded or heavily forked, trim loss will exceed what you save in labour — grade or sort first. Also skip it for round product: a trimmer needs an axis to cut along, and there is nothing to orient on a sphere.

Key specifications

Parameter Value
Capacity 500-5000 kg/h by lane count (TYPICAL, confirm with factory)
Product diameter 20-80 mm by model (TYPICAL)
Cut length Adjustable by knife position (TYPICAL)
Lanes 2-6 by model (TYPICAL)
Motor power 1.5-3.0 kW (TYPICAL)
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

How much product do I lose to trimming?

It depends on shape consistency. Straight, graded roots lose little; curved or forked roots lose much more. The only honest answer comes from a trial on a representative sample of your raw material.

Can it handle different diameters at once?

Within a band, yes if the lanes accommodate the range. A wide spread means either trimming the small pieces too hard or passing the large ones uncut — grade first.

Why do some pieces come out uncut?

Lane misfeed or product outside the diameter band. Check singulation before changing the knives.

Related equipment

This unit is one stage of a complete processing line. For the full range of cutting and slicing equipment, or to compare this model against the Vegetable Slicing Machine 1200 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Root Vegetables, General Produce

capacity

1–2 t/h

automation

Fully Automatic

cut_type

Trim

Reviews

There are no reviews yet.

Be the first to review “Vegetable Trimming Machine 1500 kg/h”

Your email address will not be published. Required fields are marked *