Tomato Drying Machine 500 kg/h

Tomato drying machine that takes sulphured or pretreated tomato halves from 95% moisture to shelf-stable at up to 500 kg/h — staged hot-air drying with the temperature control that keeps colour and lycopene through a long, low-temperature dry.

SKU: VL-175 Category: Tag:

Tomato Drying Machine 500 kg/h

Tomato drying machine holding tomato halves on trays through staged hot-air drying

A tomato is almost all water, and it guards that water behind waxy skin and dense flesh — which is why sun-drying tomatoes takes days of weather and a quarter of the crop to birds, dust and rain. A tomato drying machine does the same chemistry indoors: pretreated halves ride a belt or trays through staged hot air, giving up moisture on a controlled curve that ends at a leathery, shelf-stable product with its colour intact. For drying lines that already do onion, garlic and herbs, tomato is the crop where the machine earns a second season.

How it works

Halved, pretreated tomatoes load cut-face-up onto trays or a multi-layer belt and pass through drying chambers in stages. Early zones run warmer air across the fruit to strip surface moisture fast; mid zones hold moderate temperature while the interior moisture migrates out; final zones run cooler and drier to bring the product to 10-20% moisture without case-hardening the skin into a seal. Airflow passes through and across the product bed, humidity is exhausted and partially recirculated by controls, and belt speed or trolley advance sets total residence — typically 6 to 14 hours of staged drying depending on cut, pretreat and target moisture. Outlet product cools on a run-out before conditioning and packing.

Suitable for

Sun-dried tomato producers replacing open racks with controlled, all-weather drying; tomato processing plants adding a dried-product line beside paste and dice; herb-and-vegetable dehydrators adding tomato halves, dice or cherry tomatoes to an existing hot-air profile; producers of dried tomato dice for soups, sauces and snack inclusions; any region where sun-drying season is short, dusty or commercially unreliable.

Not suitable for

Paste and purée production, which is an evaporation-and-extraction process with different equipment; whole-berry products needing freeze-drying texture, since hot-air dried tomato comes out leathery by design; plants without pretreat and sulphuring discipline — drying unpretreated tomatoes gives colour loss and mould risk that no dryer cures; and buyers expecting hours-scale drying like vegetables — tomato’s moisture load means multi-day-class residence in practice, and the layout must plan for it.

Material & compliance

Chambers, belts and trays in SUS304 (EN 1.4301) food-grade finish; airflow and heater sections designed for sugary condensate washdown, because tomato vapour deposits sticky residue that cleans out on schedule or not at all; temperature and humidity control with recording per zone for process documentation.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Demand a drying curve for your product, not a brochure capacity: fresh-input kilos an hour depends on cut, pretreat and target moisture, and the honest number is often a fraction of the brochure. Confirm staged-zone count and control — colour retention is bought with low-temperature finish zones, and a single-zone dryer is a colour risk. Ask about cleaning access for the sticky deposits tomato leaves; a dryer that cannot be stripped loses its airflow and its hygiene together. Check energy per kilo of water removed with your utility prices, and whether heat recovery is offered. And match the inlet spec to your slicing and pretreat line — the dryer multiplies whatever arrives, including inconsistency.

When you should not buy this machine: If your sun-drying season is long, dry and reliable, weather is still the cheapest dryer on earth — buy capacity, not a building. And if your market wants freeze-dried texture or powder, this is the wrong dryer class; price both before committing the layout.

Key specifications

Parameter Value
Fresh input 300-1000 kg/h by cut and target moisture (TYPICAL, confirm with factory)
Drying temperature 50-70 °C staged zones (TYPICAL)
Residence 6-14 h staged, by belt speed / trolley advance
Zones 3-5 temperature stages with independent control
Contact material SUS304 (EN 1.4301) belts / trays
Power supply 380V/3P/50Hz, 10-30 kW class plus heat source

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Why is tomato drying so much slower than vegetables?

Moisture load and structure: a tomato is over 90% water behind dense flesh, versus 80-odd percent in most drying vegetables. The long low-temperature finish is what saves colour and texture — shortcuts show up immediately as dark, tough product buyers discount.

Does it need sulphur or other pretreat?

Pretreat is a quality decision, not a machine requirement: sulphuring or salting protects colour and shelf life for some markets, while sulphur-free lines accept a darker product or control it with tighter low-temperature drying. Confirm your market’s residue limits before fixing the recipe.

Can it run other crops?

Yes — the dryer does not know the fruit. Halved stone fruit, peppers and similar high-moisture crops run on adjusted profiles, though sticky products like tomato deposit the most residue. Confirm cleaning access covers your second crop before buying one machine for several.

Related equipment

This unit is one stage of a complete processing line. For the full range of drying and dehydration equipment, or to compare this model against the Belt Hot Air Dryer 1 t/h 30 kW, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Tomato, Cherry Tomato

capacity

300-1000 kg/h fresh input

automation

Fully Automatic

drying_temp

50-70 °C staged

Reviews

There are no reviews yet.

Be the first to review “Tomato Drying Machine 500 kg/h”

Your email address will not be published. Required fields are marked *