Vegetable Chopping Machine 1200 kg/h

Chopper that reduces whole or roughly cut vegetables to an even coarse granulate, with particle size set by the blade set and the screen rather than by operator judgement.
How it works
Product is fed into a cutting chamber through a hopper, where a rotating set of knives carries it past a fixed knife or against a screen. Pieces that are small enough pass through the screen; larger pieces are carried round and cut again, so product leaves the chamber only when it meets the size the screen allows. Particle size is therefore set by screen aperture and by blade geometry, and changing product size means changing one or both.
Feed rate matters as much as the blade. Overfeed loads the rotor and produces a wet, crushed cut; steady feed gives a clean cut with less cell damage and less free water in the product.
Suitable for
Fillings, stuffings and ready-meal components; frozen vegetable mixes where a consistent granulate is the specification; sauce and soup bases; herbs, spinach and leafy product chopped before blanching or freezing; plants replacing hand chopping where consistency and labour are the drivers.
Not suitable for
Product where a clean slice or dice is required — that is a slicer or a dicer, not a chopper; wet or very soft product that turns to pulp rather than chopping; product where cell damage causes quality loss downstream, because chopping damages more structure than slicing; anyone who wants a fine purée, which is a different machine entirely.
Material & compliance
Cutting chamber, rotor, knives, screens and hopper in SUS304 (EN 1.4301); knives in hardened stainless with replaceable edges. Hopper guarded against hand entry and interlocked; rotor stopped and isolated for blade or screen change; chamber and screen removable for washdown.
Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.
Selection notes
Buy on particle-size control and on how quickly the chamber opens for cleaning, because those two decide whether the machine is usable every day. Ask for a cut trial on your own product at your own moisture level — a chopper that handles dry carrot beautifully can pulp a wet one. Check whether the screen and blade set are changed without tools, since product changes are frequent in most plants.
When you should not buy this machine: If you need cubes, slices or strips, this is the wrong machine — a chopper gives granulate, and no screen setting turns it into a dice. Also skip it if free water in the product matters: chopping releases more water than a clean cut, and that shows up in your filling or your frozen pack.
Key specifications
| Parameter | Value |
| Capacity | 300-5000 kg/h by model (TYPICAL, confirm with factory) |
| Particle size | 2-20 mm by screen and blade set (TYPICAL) |
| Blade sets | Interchangeable, 2-4 supplied (TYPICAL) |
| Rotor speed | Variable by model (TYPICAL) |
| Motor power | 2.2-7.5 kW by model (TYPICAL) |
| Contact material | SUS304 (EN 1.4301) |
| Power supply | 380V/3P/50Hz or 415V/3P/50Hz, customizable |
Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.
FAQ
How do I set the particle size?
With the screen aperture and the blade set. The screen decides what leaves the chamber; the blades decide how many passes it takes to get there.
Why is my chopped product wet?
Cell damage and overfeed. A blunt blade set crushes rather than cuts, and overfeeding loads the rotor — both release water you would rather keep in the product.
Can I chop leafy and root product on the same machine?
Usually, with different blade sets and speeds. Leafy product wants a sharp, fast cut; dense root product wants torque, and the motor and the blade geometry differ.
Related equipment
This unit is one stage of a complete processing line. For the full range of cutting and slicing equipment, or to compare this model against the Vegetable Shredding Machine 800 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.









Reviews
There are no reviews yet.