Batch Frying Machine 300 kg/h

Batch fryer that holds a fixed volume of oil at temperature and cooks product one load at a time, with discharge by basket lift, by tipping or by a bottom valve.
How it works
Oil in an insulated vessel is heated to the frying temperature by electric elements, a steam coil or a gas burner. Product is loaded into a basket or into the vessel, submerged, and held for the cycle time. Moisture leaves as steam, the product cooks and colours, and the load is lifted or tipped out to drain. Oil is filtered continuously or between batches, and topped up as product carries it out.
Cycle control is the operator’s job in a semi-automatic machine: load size, time and temperature decide the result, and consistency comes from doing all three the same way every batch.
Suitable for
Plants running several products on one fryer, where changeover matters more than throughput; snack and specialty vegetable products at moderate volume; seasonal or trial production; product that needs a different time or temperature profile from the rest of the line; operations where a continuous fryer cannot be justified on volume.
Not suitable for
Single-product lines at high tonnage, where continuous frying wins on oil turnover and labour; product requiring a very tight moisture or colour distribution — batch variation is wider than continuous; plants with no oil management discipline, because batch fryers degrade oil faster per kg of product if crumbs and fines are left in; anyone expecting continuous output from a batch cycle.
Material & compliance
Vessel, basket and frame in SUS304 (EN 1.4301); heating surfaces arranged for cleaning and for full oil draindown. Lid, splash guards and basket lift guarded; over-temperature cut-out fitted; oil filtration port or integrated filter circuit.
Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.
Selection notes
Size the vessel to your load, not to your ambition — an oversized fryer holds more oil than you need, and oil degrades with time at temperature whether or not product is in it. Ask how long the oil takes to recover temperature after a cold load, because that recovery time sets your real cycle. Check how the vessel drains and cleans: a fryer that takes an hour to clean is a fryer that gets cleaned reluctantly.
When you should not buy this machine: If you run one product at high volume, buy a continuous fryer — you will get better oil quality, lower labour per kg and tighter product consistency. Also skip batch frying if your product specification is tight: batch-to-batch spread is real, and the fix is continuous processing, not a better batch machine.
Key specifications
| Parameter | Value |
| Capacity | 100-800 kg/h by batch cycle (TYPICAL, confirm with factory) |
| Oil volume | 100-600 L by model (TYPICAL) |
| Frying temperature | Up to 190 °C (TYPICAL) |
| Batch cycle | 3-15 min by product (TYPICAL) |
| Heating | Electric, steam or gas by model (TYPICAL) |
| Contact material | SUS304 (EN 1.4301) |
| Power supply | 380V/3P/50Hz or 415V/3P/50Hz, customizable |
Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.
FAQ
How do I size a batch fryer for my line?
From load size and cycle time, then check it against oil turnover. Too large a vessel means oil sits hot for longer than it should, which costs you oil quality rather than capacity.
Why does my oil darken faster than expected?
Usually fines. Crumbs left in the oil between batches burn and catalyse degradation, so filtration and regular cleanout matter more than the oil you buy.
Can I fry different products in the same oil?
Sometimes, and usually with a sequence — mild products first, strongly flavoured or coated products last. Cross-flavour carryover is the practical limit, not the fryer.
Related equipment
This unit is one stage of a complete processing line. For the full range of cooking and blanching equipment, or to compare this model against the Continuous Frying Machine 500 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.










Reviews
There are no reviews yet.