Ginger Washing and Peeling Machine 1000 kg/h

Washing and peeling unit built for ginger’s knotted rhizome shape, using soft-bristle rollers in a water bath to strip the thin skin out of every crevice without gouging the flesh lobes between the fingers.

SKU: VL-124 Category: Tag:

Ginger Washing and Peeling Machine 1000 kg/h

Ginger washing and peeling machine scrubbing rhizomes clean on brush rollers

Ginger punishes every general-purpose washer. Its shape is a knot of lobes and deep crevices; its skin is thin, papery and stuck into every fold; and its flesh bruises and weeps juice the moment a hard brush or blade touches it. A ginger washer-peeler is therefore a soft machine: flexible bristles, a water bath that floats the rhizomes over the rollers, and enough residence time for the brush tips to work into the folds that a rigid roller sails past.

How it works

Rhizomes are fed into a tank where nine or more brush rollers run in a staggered pattern beneath the water line. The bristles are soft nylon, long enough to flex into the crevices between lobes; the rollers’ staggered spacing means every rhizome crosses multiple brush fields as a screw flight carries it forward through the bath. Spray bars above rinse the loosened skin and soil off continuously. Water depth is set so the ginger tumbles rather than grinds — floating product lets brushes clean the underside, which is where a rigid roller bed fails on ginger. Peeling depth is a function of brush stiffness and residence time, and both are adjustable; the skin comes off as a papery slurry that the water carries to an overflow.

Suitable for

Ginger washing and peeling ahead of slicing, drying or juice lines; turmeric and galangal with comparable knotted shapes; fresh ginger packing operations where the market expects clean, unbruised rhizomes; organic and premium ginger lines where chemical peeling is not an option and abrasive drums cost too much flesh.

Not suitable for

Cassava-thick bark, which needs abrasive drums rather than soft brushes; smooth-skin roots like carrot run fine but are over-served by this machine’s gentleness — a standard brush washer is cheaper; operations expecting peeling without water, because the bath is the mechanism, not an option.

Material & compliance

Tank, rollers, flight and discharge chute in SUS304 (EN 1.4301); bristles food-grade nylon in mixed stiffness sets, carried on removable rollers so worn sets are replaced without dismantling the tank. Spray nozzles removable for descaling. Water recirculation with filtration, because ginger soil loads the bath quickly. Drive guards; interlocked tank access.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Ask the supplier to run ginger — not potatoes — on the machine, and inspect the crevices of the output: skin left in the folds is the failure mode of this machine class and it hides from a distance. Ask about bristle sets: stiffness options, replacement cost, and how a set is swapped. Check water consumption and the filtration on the recirculation loop. Check the feed arrangement against your upstream splitting or sawing, since whole large hands may need dividing first.

When you should not buy this machine: If your ginger is destined for a peeling-and-slicing line that peels after slicing anyway, this machine duplicates work — wash-only settings would do. And if your volumes are small and seasonal, a batch peeler with manual feeding serves better than a continuous machine run one week a month.

Key specifications

Parameter Value
Capacity 500-2000 kg/h by roller length (TYPICAL, confirm with factory)
Rollers 9-13 soft nylon brush rollers, staggered (TYPICAL)
Peeling rate 85-95 % with skin-in-crevice caveat (TYPICAL)
Water consumption 0.5-2 m3/h with recirculation (TYPICAL)
Roller drive 1.5-3 kW with speed adjustment (TYPICAL)
Bristle sets Mixed stiffness, removable rollers
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Does it get the skin out of the crevices?

Mostly — that is the design goal, and the difference between suppliers is exactly this number. Long soft bristles plus floating product plus residence time get the folds; the honest test is a run on your ginger followed by a close look at the output, not a brochure claim.

Will it bruise the flesh?

Not if set right. Bruising comes from stiff bristles, shallow water or overloaded feed; all three are settings. This machine class bruises less than abrasive drums by design — that is its reason to exist.

Can it run turmeric and galangal?

Yes — same knotted rhizome problem, same solution. Brush sets and residence time adjust per crop; the tank and roller geometry do not change.

Related equipment

This unit is one stage of a complete processing line. For the full range of washing and peeling equipment, or to compare this model against the Brush Roller Peeling Machine 800 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Ginger, Turmeric, Galangal

capacity

500–2000 kg/h

automation

Semi-Automatic, Fully Automatic

peeling_method

Soft Brush Roller

Reviews

There are no reviews yet.

Be the first to review “Ginger Washing and Peeling Machine 1000 kg/h”

Your email address will not be published. Required fields are marked *