Garlic Clove Separator 500 kg/h

Separating unit that breaks garlic bulbs into individual cloves by rubber-coated rollers without damaging the clove skin, with an integrated fan removing loose skins and dust before peeling or grading.

SKU: VL-083 Category: Tag:

Garlic Clove Separator 500 kg/h

Garlic clove separator breaking bulbs into individual cloves between rubber rollers

Separating unit that turns bulbs into individual cloves. Every peeled-clove product starts here, and the quality bar is odd: the clove must come out of its bulb whole, with its skin still on, because the peeling step downstream only works on undamaged cloves.

How it works

Bulbs are fed between two counter-rotating rollers covered with food-grade rubber. The rollers grip the bulb and shear it apart along the natural clove boundaries — the machine exploits how the bulb is built rather than cutting anything. Gap and speed are set against clove size: too tight crushes, too loose passes bulbs through unbroken.

Separated cloves fall through to a discharge, while the loose papery skins and dust are lifted by an aspiration fan into a collection bag. A second pass or an adjustable gap handles the bulbs that did not break fully on the first pass. Output goes to clove grading, then to peeling.

Suitable for

Garlic peeling operations, where the separator is the mandatory first step; garlic powder and granule lines feeding a peeler and dryer; fresh-peeled clove packing operations; operations that receive bulbs and need to rate the line in cloves, not bulbs; processing plants handling different varieties, where gap adjustment covers the size difference between variety classes.

Not suitable for

Clove products where a bulb look is the specification — this machine’s whole purpose is to dismantle bulbs; wet or freshly cured garlic with high-moisture skins, which stick to the rollers instead of aspirating away; operations without a plan for the skin and dust stream, which is bulky and accumulates fast; anyone expecting one setting to handle every variety without adjustment.

Material & compliance

Frame, hopper and chutes in SUS304 (EN 1.4301); rollers with food-grade rubber covering, replaceable as a consumable. Aspiration fan and ducting arranged so dust does not discharge into the workroom; the machine must open for daily cleaning, because garlic dust is hygroscopic and builds up.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Ask for the unbroken-bulb rate and the damaged-clove rate at the same setting — a machine that separates beautifully but bruises a tenth of the cloves has failed the actual specification. Check that the rubber covering is replaceable and stocked; it is the wear part and it wears fast on hard garlic. Check the aspiration design against your room: skin dust everywhere is the common complaint with under-specified separators.

When you should not buy this machine: If your throughput is a few bags a day, hand separation is free and gentler. And if your garlic arrives wet or poorly cured, fix the curing first — the separator cannot work against skins that stick, and no setting will compensate.

Key specifications

Parameter Value
Capacity 300-800 kg/h by roller width (TYPICAL, confirm with factory)
Separation method Counter-rotating rubber-coated rollers
Clove damage Low; skin kept intact for peeling (TYPICAL)
Skin removal Integrated aspiration fan
Break rate Adjustable by roller gap and speed
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Why must the clove skin stay intact?

Because the peeling machine downstream works by pneumatically or mechanically shocking the skin off a whole clove. A bruised or split clove peels badly and oxidises faster, so the separator is specified to protect the skin, not just to break the bulb.

Does one machine handle every variety?

It handles a range, not everything. Variety classes differ in bulb size and clove count, and the roller gap is adjusted between them. A plant switching between large Spanish-type and small solo-type garlic treats that as a changeover, not a switch.

What is the wear part?

The rubber roller covering. It is a consumable with a defined life measured in tonnes; a supplier who cannot quote that life or stock replacements is selling a machine with a hidden annual cost.

Related equipment

This unit is one stage of a complete processing line. For the full range of sorting and grading equipment, or to compare this model against the Weight Grading Machine 3000 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Garlic

capacity

300–800 kg/h

automation

Fully Automatic

separation_method

Roller Breaking

Reviews

There are no reviews yet.

Be the first to review “Garlic Clove Separator 500 kg/h”

Your email address will not be published. Required fields are marked *