Vegetable Destoner Machine 3000 kg/h

Density separator that removes stones, glass and heavy debris from washed vegetables and fruit before cutting or further processing.

SKU: VL-053 Category: Tag:

Vegetable Destoner Machine

Vegetable destoner machine separating stones and clods from root vegetables

Destoner that separates dense contamination — stones, glass, sand clods, metal fragments — from product by density, using an inclined oscillating deck with air flowing up through it.

How it works

Product is fed onto a porous, inclined deck that oscillates while air is blown up through it. The air fluidises the bed: light product floats on the air cushion and travels down the incline to the product discharge. Dense pieces sink through the fluidised layer, contact the deck, and are carried uphill by the oscillating motion to the stone discharge. Deck inclination, oscillation amplitude and air volume are the three settings that set the cut point.

The separation is by density and drag together, which is why a destoner removes stones that a screen cannot — the stone may be smaller than the product, and size-based separation never sees it.

Suitable for

Root vegetables before cutting, where a stone damages knives; product harvested close to the ground; beans, peas and lentil-type product; removing glass and metal fragments after a breakage incident; any line where dense contamination is a real risk and detection alone is not enough.

Not suitable for

Light contamination, which an aspirator handles better; product and contaminant of similar density; very wet or sticky product that will not fluidise; product that is damaged by deck oscillation.

Material & compliance

Deck, frame, air chamber and discharge chutes in SUS304 (EN 1.4301); deck mesh specified to the product. Air filtered where it contacts food; exhaust routed to a cyclone or filter. Deck removable for cleaning; chamber drainable.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Give the factory real samples of your product and the stones you actually find, because the cut point sits between their densities. Ask how the three settings are adjusted and whether they are repeatable after a clean — a destoner that drifts out of adjustment quietly stops protecting your knives. Check where the stone stream goes and how it is inspected, since the reject stream is how you know the machine is working.

When you should not buy this machine: If your contamination is light — leaf, husk, chaff — you need an aspirator, not a destoner; the two are complementary and rarely interchangeable. Also skip it if the product will not fluidise: wet, sticky or very fine material behaves differently on the deck and will not separate cleanly.

Key specifications

Parameter Value
Capacity 500-10000 kg/h by deck size (TYPICAL, confirm with factory)
Separation principle Fluidised bed on an inclined oscillating deck (TYPICAL)
Air volume Model and product dependent (TYPICAL)
Deck inclination Adjustable (TYPICAL)
Fan power 2.2-7.5 kW (TYPICAL)
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Destoner or metal detector — do I need both?

They do different jobs. A destoner removes dense foreign material continuously and prevents damage; a detector identifies and rejects metal that passes through. Most lines use both, with the destoner upstream protecting the cutting equipment.

Why does product appear in the stone discharge?

Air volume too high or deck inclination wrong for the product. Product is being carried uphill with the stones — reduce air or adjust the deck until the reject stream is clean of saleable product.

Can it remove glass?

Yes, where the fragment is denser than the product and large enough to behave differently on the deck. Very small fragments may pass, which is why a destoner complements rather than replaces good upstream practice.

Related equipment

This unit is one stage of a complete processing line. For the full range of sorting and grading equipment, or to compare this model against the Air Aspiration Separator 2000 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Root Vegetables, General Produce, Leafy Greens

capacity

2–5 t/h

automation

Fully Automatic

grading_method

Density (Gravity)

Reviews

There are no reviews yet.

Be the first to review “Vegetable Destoner Machine 3000 kg/h”

Your email address will not be published. Required fields are marked *