Screw Press Juice Extractor 3000 kg/h

Continuous screw press that separates juice from fruit and vegetable mash by progressive compression against a screened cage.

SKU: VL-030 Category: Tag:

Screw Press Juice Extractor

Screw press juice extractor separating juice from pomace

Continuous screw press that separates juice from fruit and vegetable mash by squeezing it against a perforated screen, discharging pomace continuously at the far end.

How it works

Mash is fed into a cylindrical screen cage containing a tapered screw. As the screw rotates, the channel volume shrinks, so pressure rises along the length and liquid is forced out through the screen while solids continue forward. A cone or annular gap at the discharge end sets the back pressure on the pomace. Juice is collected in a pan below and pumped on; pomace falls out at a controlled dryness.

Back pressure sets the trade-off: more pressure means higher juice yield, but also more fines and solids carried through the screen, which loads the downstream clarification step.

Suitable for

Apples and pears after crushing; berries and soft fruit after enzymatic treatment; tomatoes for juice and paste; grapes and stone fruit after destoning; continuous lines where a batch press cannot keep up.

Not suitable for

Fruit with pits still in, which will damage the screw and screen; product needing very clear juice straight from the press, which needs a downstream separator; very low volumes where a batch press is simpler and cheaper.

Material & compliance

Screw, cage and screen in SUS304 (EN 1.4301); SUS316L (EN 1.4404) on request for high-acid product such as tomato and citrus. Food-contact elastomers can be supplied to FDA 21 CFR 175 where required. Screen and screw accessible for cleaning without dismantling the drive.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Test yield on your own fruit and at your own mash preparation — published yield figures come from a controlled mash that your line may not produce. Ask how the discharge cone is adjusted and whether it can be changed while running, since that is how you tune yield against clarity. Check screen cleaning access: a screen that cannot be cleaned in place will blind within a shift on pectin-rich fruit.

When you should not buy this machine: If your downstream process cannot handle the fines a screw press produces, a belt press gives cleaner juice at slightly lower yield. Also skip it if you press several very different fruits on one line without cleaning between them — carryover and pectin build-up will dominate your day.

Key specifications

Parameter Value
Capacity 500-10000 kg/h by model (TYPICAL, confirm with factory)
Juice yield Product dependent, test on own fruit (TYPICAL)
Screen aperture 0.3-1.5 mm by product (TYPICAL)
Motor power 5.5-15.0 kW (TYPICAL)
Contact material SUS304 (EN 1.4301); SUS316L on request
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Screw press or belt press — which gives more juice?

A screw press usually gives slightly higher yield and handles a wider range of mash. A belt press produces juice with fewer suspended solids and is gentler on the mash. Choose on whether yield or downstream clarification is your constraint.

How do I increase juice yield?

Enzymatic mash treatment ahead of the press usually gains more than pressing harder. Beyond that, adjust the discharge back pressure, and check mash particle size — a crusher set too coarse or too fine both cost yield.

Why does my juice contain too much pulp?

Screen aperture too large or back pressure too high, forcing solids through. Reduce pressure, fit a finer screen, and plan on a finisher or centrifuge downstream if your specification is tight.

Related equipment

This unit is one stage of a complete processing line. For the full range of pulping and juicing equipment, or to compare this model against the Fruit Crusher 3000 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready), FDA 21 CFR 175

surface_finish

Ra≤0.8 μm (food-grade)

application

Apple/Pear, Berries, Tomato

capacity

2–5 t/h

automation

Fully Automatic

Reviews

There are no reviews yet.

Be the first to review “Screw Press Juice Extractor 3000 kg/h”

Your email address will not be published. Required fields are marked *