Fryer Oil Filter Machine 200 L/h

Vacuum-assisted fryer oil filter machine that drains frying oil, strips fines and carbon crumbs through filter media and returns bright oil to the fryer, cutting oil turnover cost and pulling acrid burnt notes out of fried vegetable products.

SKU: VL-145 Category: Tag:

Fryer Oil Filter Machine 200 L/h

Fryer oil filter machine draining frying oil through filter media and returning clean bright oil to the fryer vat

Frying oil does not fail all at once — it fails in the crumbs. Every batter fleck, every broken french fry, every breading shard left in the oil keeps cooking, carbonises, and hands its bitterness to every batch that follows. Fryers filtered daily serve brighter product and consume dramatically less fresh oil; the fryer oil filter machine is the reason, draining, cleaning and returning oil in one supervised cycle.

How it works

At end of shift or on a timed cycle, the filter connects to the fryer drain and pumps oil out under vacuum or pump pressure into the filter chamber. Oil passes through a filter medium — paper sheets, or a plate-and-frame assist — that catches free crumbs, batter fines and carbon particles down to fine grades; some designs add an adsorbent pad stage that strips polar compounds and free fatty acids modestly. Filtered oil returns to the fryer through a separate line, hot and bright, ready for the next day. Cycle time runs 15 to 40 minutes for a typical fryer volume; media disposal and a quick chamber rinse close the loop. The machine does not restore degraded oil — it removes what accelerates degradation.

Suitable for

Fried snack lines — vegetable chips, tempura vegetables, battered products — where crumb load is heavy and daily filtration visibly extends oil life; restaurants and central kitchens running batch fryers, where a mobile filter cart serves several vats per shift; continuous fryer lines integrating filtration as a bypass loop during production; any operator tracking oil quality by TPM or FFA test strips who needs the numbers to stay inside spec without dumping oil every second day.

Not suitable for

Oil already past its discard point — filtration is maintenance, not resurrection, and TPM above the discard line means the oil goes out regardless; fryers running heavily emulsifying products where the failure mode is water and not solids; and buyers wanting to filter cold solid fat — the oil must be hot and fluid to move and pass media.

Material & compliance

Tank, pump, chamber and piping in SUS304 (EN 1.4301); pump rated for hot oil with temperature-rated seals; filter media food-contact compliant with documented grade. Hot-oil handling dominates the safety case — insulated lines, drain interlocks, and a machine that cannot pump oil unless the return path is open.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Ask which media grades the machine takes and the cost per filtration cycle — media is the consumable and cheap machines sometimes lock you to priced sheets. Ask whether the machine filters by gravity, pump or vacuum, and what fines grade each actually holds; ask for a demonstration on dark oil with visible crumb. Check drain and return connection compatibility with your fryer brand and whether hoses are heat-rated. Ask about mobility — a cart that serves four fryers is four filters of value. And ask what TPM reduction to expect per pass, honestly: expect solids removal and modest chemical improvement, not miracle chemistry.

When you should not buy this machine: If your fryer runs a few hours a week for a small kitchen, daily skimming and an oil-change discipline remain cheaper than equipment. And if your product is par-fried and frozen downstream with short oil life anyway, put the budget into fryer temperature control instead — it moves the same TPM curve.

Key specifications

Parameter Value
Filtration rate 100-400 L/h by model (TYPICAL, confirm with factory)
Filter media Food-grade paper sheets / plate assist (TYPICAL)
Fines retention To fine grade; adsorbent pad option
Cycle time 15-40 min per fryer (TYPICAL)
Operating oil temp 160-190 °C handling
Contact material SUS304 (EN 1.4301), heat-rated seals
Power supply 220-380V, 0.75-2.2 kW class

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

How much oil does filtration actually save?

Operations that filter daily commonly report 30-50% longer oil life against an unfiltered baseline — the crumb load, product type and fryer discipline set the real number. Track your own TPM and fresh-oil invoices for a month before and after; the filter pays for itself on the invoice difference.

Does filtering remove the burnt taste?

The burnt taste lives in carbonised fines suspended in the oil, and removing fines removes most of the acrid note. Flavour chemistry already absorbed into product is another matter — the machine cleans the oil, not yesterday’s chips.

Paper or plate filter — which should I choose?

Paper suits mobile carts and daily vat cycles; plate systems suit higher volumes and finer clarity with adsorbent options. Match to crumb load and volume: heavy breading wants the coarser fast cycle, premium clarity products want the plate route.

Related equipment

This unit is one stage of a complete processing line. For the full range of cooking and blanching equipment, or to compare this model against the Continuous Frying Machine 500 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Fried Snack, Tempura, Vegetable Chip

capacity

100–400 L/h

automation

Semi-Automatic

filter_media

Paper / Plate Assist

Reviews

There are no reviews yet.

Be the first to review “Fryer Oil Filter Machine 200 L/h”

Your email address will not be published. Required fields are marked *