Onion Peeling Machine 1000 kg/h

Continuous peeler that removes dry skin from onions, garlic and shallots by air, abrasion or flame, with root and top trimming where required.

SKU: VL-060 Category: Tag:

Onion Peeling Machine

Onion peeling machine stripping outer skins with compressed air

Continuous peeler that removes the dry outer skin from onions, garlic and shallots at line rate, with trimming of root and top where the product specification requires it.

How it works

Onions are fed onto a belt or into a rotating drum. Depending on the design, high-velocity compressed air jets strip the dry skin, gentle abrasion against a lined surface rubs it off, or a flame passes over the surface to char it before it is brushed away. Loose skin is drawn off by extraction and separated from the product. Where roots and tops must go, a trimming section cuts them before or after peeling.

The dry skin is the target. The machine is not removing layers of flesh, and peeling yield depends on how dry and how tight the skin is on the bulb — which changes with variety, storage and season.

Suitable for

Onion processing for fresh peeled, diced or frozen product; garlic and shallot peeling; prepared vegetable and ready-meal lines; product going to drying, frying or pickling where skin in the pack is a defect; replacing manual peeling at scale.

Not suitable for

Very small or very large bulbs outside the machine’s size band; wet or sprouting onions where the skin does not release; product where a flame or abrasion mark is unacceptable on the surface; very low volumes where hand peeling is cheaper.

Material & compliance

Drum or belt, hopper, discharge and extraction ducting in SUS304 (EN 1.4301); contact surfaces specified for the product and the washdown. Extraction handles skin and dust, which matters for both housekeeping and operator environment; guards interlocked over moving parts.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Ask for a measured peeling rate on your own onions, in your season — dry, tight skin gives a very different result from late-season storage onions, and a headline rate means nothing without it. Check what happens to the waste skin, because extraction is often the part that was undersized. Confirm whether trimming is included, since roots and tops usually have to go and a separate operation costs labour.

When you should not buy this machine: If your onions are wet, sprouting or badly graded, peeling rate will collapse and you will lose more flesh than you save in labour. Also skip it if you need an unmarked surface: flame and abrasion both leave their signature, and a knife-peeled or hand-finished product is a different specification.

Key specifications

Parameter Value
Capacity 300-5000 kg/h by model (TYPICAL, confirm with factory)
Peeling principle Compressed air, abrasion or flame by model (TYPICAL)
Peeling rate Product and dryness dependent (TYPICAL)
Compressed air demand Model dependent, where air peeling (TYPICAL)
Motor power 3.0-7.5 kW (TYPICAL)
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Which peeling method is best?

It depends on the product and the finish you need. Air peeling is gentle and suits whole peeled onions; abrasion is simpler and leaves more surface marks; flame gives a distinctive finish used for pickling onions. Test on your own product.

Why does peeling rate drop in storage season?

The skin tightens and the bulb changes. Late-season and sprouting onions peel worse than fresh, dry-skinned ones — that is a raw material effect, not a machine fault.

Do I need trimming as well?

Usually, if the specification is a peeled whole onion. Roots and tops do not come off with the skin, so confirm whether the machine includes a trimming section or whether it is a separate step.

Related equipment

This unit is one stage of a complete processing line. For the full range of washing and peeling equipment, or to compare this model against the Brush Roller Peeling Machine 800 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Root Vegetables, General Produce

capacity

1–2 t/h

automation

Fully Automatic

washing_method

Air Peeling

Reviews

There are no reviews yet.

Be the first to review “Onion Peeling Machine 1000 kg/h”

Your email address will not be published. Required fields are marked *