Basket Press 800 kg/batch

Basket press that squeezes mashed fruit inside a perforated stainless basket at up to 800 kg a batch — gentle low-speed pressing that keeps pulp and sediment out of the juice, the traditional yield workhorse for cloudy apple, berry and stone-fruit juice.

SKU: VL-185 Category: Tag:

Basket Press 800 kg/batch

Basket press with a perforated stainless basket pressing fruit pulp to extract clear juice

Not every juice wants to be clear. Cloudy apple, berry nectars and premium stone-fruit juices live on body and flavour — and body comes from pressing gently, slowly, and against a screen that holds pulp back while the juice runs. The basket press is that machine: mash fills a perforated stainless basket, a hydraulic plate presses it steadily, and juice that tastes like the fruit — not like the machine — drains out the sides. Screw presses out-press it on throughput; nothing out-presses it on what the juice keeps.

How it works

Crushed mash loads the perforated basket, usually through a cloth or liner that defines the filtration. The press closes: a hydraulic ram drives a plate down onto the mash at low, controlled speed, and pressure climbs in stages while juice flows through the perforations to a collection tray around the basket. Pause stages let the juice migrate — the pressing curve matters more than the peak, and that is why recipe control beats a fast ram. At cycle end the ram retracts, the basket opens or the cake is discharged, and the pomace leaves dry and in one piece. Cycle time runs 20 to 40 minutes by fruit and recipe, and the whole machine strips down for washing, because mash dries into everything it touches.

Suitable for

Cloudy apple juice producers pressing fresh mash for that body-first product; berry processors squeezing soft fruit where screw pressing shears seeds and skins into the juice; small and mid juice houses running batch logic with pressing between milling and pasteurizing; cider makers who want the traditional pressing profile; stone-fruit and grape operations pressing delicate pulps at premium quality points.

Not suitable for

High-throughput clear-juice lines, where screw or belt presses run continuously and the clarity train removes what the basket press keeps; products needing enzymatic yields beyond mechanical pressing, which is a process decision before a machine one; operations without washdown discipline, because a press is the most hygiene-critical machine on the juice side when mash dries in place; and plants that cannot accept 20-40 minute batch cycles in their flow.

Material & compliance

Basket, plates, frames and juice trays in SUS304 (EN 1.4301) food-grade finish; perforation and liner systems food-safe and replaceable; hydraulic power pack separated from the product zone; controls with staged pressure recipes, since the pressing curve is the product.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts; hydraulic system documentation per component suppliers.

Selection notes

Start from the fruit and the juice spec: mash type, batch size and target juice style decide basket volume and press force, and the honest trial presses your mash at your recipe. Ask for the pressing curve control — staged pressure with pauses is what separates a juice press from a strong ram. Check basket handling: how the liner loads, how the cake discharges, and how long a full changeover takes, because batch rhythm is your throughput. Verify washdown access to every mash surface; the basket’s perforations clean on schedule or flavour carries over. And match cycle time to your milling and pasteurizing steps in writing, since the press sets the pace of the whole juice room.

When you should not buy this machine: If your product is clear juice at volume, buy the screw or belt press and the clarity train — the basket’s gentle juice is a different product. And if your volumes are small and seasonal, a manual or smaller basket may hold your economics better than the largest automated frame.

Key specifications

Parameter Value
Batch capacity 400-1200 kg mash by basket size (TYPICAL, confirm with factory)
Cycle time 20-40 min by fruit and recipe (TYPICAL)
Press force Hydraulic, staged-pressure recipe control
Basket Perforated SUS304, liner system
Juice path Perforate drain to surrounding collection tray
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz, 3-8 kW class

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Basket or screw press for cloudy apple?

Style decides it: cloudy juice wants the basket’s gentle, low-shear press; clear juice at volume wants the screw’s throughput and pairs with clarification anyway. Producers chasing premium cloudy product almost always land on the basket — the juice tastes like the decision.

How is yield against a screw press?

Screws usually press a few points drier and faster; baskets often give juice with better flavour and body at slightly lower yield. Run your mash both ways if possible and price the difference against your bottle price — the answer is commercial, not mechanical.

What does daily cleaning really involve?

Basket strips, liner changes, tray and auger washdown, hydraulic zone check — plan 30-45 minutes around the batch rhythm. Mash dries hard; the press that cleans on schedule keeps its flavour neutrality, and the one that does not tastes of yesterday’s fruit.

Related equipment

This unit is one stage of a complete processing line. For the full range of pulping and juicing equipment, or to compare this model against the Screw Press Juice Extractor 3000 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Apple Mash, Berries, Stone Fruit

capacity

400-1200 kg/batch

automation

Fully Automatic

press_type

Hydraulic Basket

Reviews

There are no reviews yet.

Be the first to review “Basket Press 800 kg/batch”

Your email address will not be published. Required fields are marked *