Garlic Drying Machine 1000 kg/h

Multi-zone hot-air belt dryer that takes peeled or sliced garlic down to storage-safe moisture without scorching, holding the low temperature and long dwell that garlic’s flavour chemistry demands.

SKU: VL-135 Category: Tag:

Garlic Drying Machine 1000 kg/h

Garlic drying machine carrying peeled cloves and slices through low-temperature hot-air zones

Garlic is easy to dry and easy to ruin. Push the air too hot and the cloves toast — the colour goes ivory to tan, the pungency flattens, and the powder made from it tastes of the mistake. A garlic drying machine exists to hold the boring truth of the product: moderate temperature, moving air, enough belt length for the water to leave at water’s own pace. The machine is a climate corridor, and the corridor’s discipline is the whole product.

How it works

Prepared garlic — peeled cloves or 2-3 mm slices — is spread in an even layer on a stainless mesh belt that carries it through a multi-zone drying tunnel. Each zone holds its own temperature and airflow: entry zones warmer to strip surface water fast, middle zones moderate, exit zones cooler to finish without colour drift. Air is heated by steam, gas or electric exchangers and circulated across the belt in cross-flow, with humidity vented and heat partly recycled between zones. Belt speed sets dwell — several hours, not minutes, for a proper garlic dry. Exiting product passes a cooling section, then to conditioning bins where residual moisture equalises before milling or packing.

Suitable for

Dehydrated garlic plants producing flakes, granules and powder, where drying is the step that sets colour and flavour grades; peeled-clove suppliers drying surface water before packing or oil packing; spice processors running garlic alongside onion and chilli on a shared tunnel with recipe changeovers.

Not suitable for

Buyers wanting black garlic — that is a fermented product with its own machines and months of patience, nothing to do with hot-air drying; very small artisan volumes, where cabinet tray dryers remain honest economics; sites without steam, gas or adequate electrical capacity, because a tunnel dryer is a heat plant before it is a conveyor; anyone comparing capacity across products without asking — onion, garlic and chilli have very different water-to-travel ratios on the same belt.

Material & compliance

Tunnel, belt and product-contact guides in SUS304 (EN 1.4301); heat exchangers positioned so no combustion products touch the airstream on gas-heated units; insulation on all hot faces with guarded surfaces. Controls log zone temperatures and belt speed, because a drying record is the batch’s quality certificate when a customer asks why this lot smells right.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts.

Selection notes

Ask for the temperature profile the tunnel runs for garlic specifically, and the colour result — L-value or visual — from a trial on your cloves. Ask how zones are controlled and whether the record exports; garlic for export increasingly travels with a drying log. Check belt cleaning access: garlic slices shed fines that lodge in the mesh and scorch. Check the heat source against your site — steam, gas and electric give different cost curves at the same tunnel. Check the conditioning bins are included; drying ends at the bin, not the tunnel exit.

When you should not buy this machine: If your garlic is destined for cold-storage whole bulbs, no dryer belongs in the plan — drying is for processed garlic. And if the budget forces a single-zone tunnel at a price that looks too good, walk away; single-zone garlic drying is how brown flakes get made cheaply and sold unhappily.

Key specifications

Parameter Value
Fresh input capacity 500-2000 kg/h by model (TYPICAL, confirm with factory)
Zones 3-6 independent temperature zones
Drying temperature 50-70 °C garlic profile (TYPICAL)
Dwell time 2-6 h by slice thickness (TYPICAL)
Heat source Steam / gas / electric exchanger
Belt Stainless mesh, multi-layer option
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz, 15-60 kW class

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

What temperature keeps garlic flakes white?

Most garlic profiles hold 50-65 °C after the surface-water zone; the exact curve depends on slice thickness and airflow. Ask the factory for colour results from a trial with your garlic — the curve that made their demo flakes white is not automatically yours.

Slices or whole peeled cloves — same machine?

Yes, with different dwell and loading. Slices dry in hours; whole cloves take longer and risk case-hardening if the entry zone runs hot. Tell the factory which product leads; the belt loading and zone recipe should be quoted for it.

What moisture should dried garlic leave the tunnel at?

Around 6-7% for flakes destined for milling, with conditioning bins equalising to a stable final value. Packing above stable moisture is how dried garlic cakes in the bag — ask where the specification sits and how it is measured.

Related equipment

This unit is one stage of a complete processing line. For the full range of drying and dehydration equipment, or to compare this model against the Belt Hot Air Dryer 1 t/h 30 kW, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Garlic, Dehydrated Vegetable

capacity

500–2000 kg/h fresh input

automation

Fully Automatic

drying_mode

Multi-zone Hot Air

Reviews

There are no reviews yet.

Be the first to review “Garlic Drying Machine 1000 kg/h”

Your email address will not be published. Required fields are marked *