Metal Detector Conveyor 2000 kg/h

Inline metal detector with reject mechanism that identifies and removes metal contamination from packed or unpackaged product on the line.

SKU: VL-054 Category: Tag:

Metal Detector Conveyor

Conveyor metal detector with automatic reject system on a food processing line

Inline metal detector that finds ferrous, non-ferrous and stainless metal in product passing through its aperture, and rejects the contaminated portion automatically.

How it works

Product travels on a conveyor belt through a detector head containing transmitter and receiver coils. Metal passing through the aperture disturbs the electromagnetic field, and the resulting signal is compared against the product’s own background signal. When the disturbance exceeds the set threshold, the reject mechanism — air blast, pusher or belt drop — removes the affected portion into a locked reject bin.

Sensitivity is a function of aperture size and product effect. Wet, salty or metallic-rich product produces its own signal, and that background is what limits how small a fragment the detector can find.

Suitable for

Detection at the end of a line before packing, as a critical control point; product after cutting, where a broken blade is a plausible contaminant; packed goods, where detection happens after sealing; bulk product on a belt before further processing.

Not suitable for

Product in metal containers or foil packaging, which the detector cannot see through; product with a very high intrinsic signal, where sensitivity drops sharply; applications requiring detection of non-metallic contamination, which needs X-ray; lines without a documented reject and verification procedure.

Material & compliance

Detector frame, belt and support in SUS304 (EN 1.4301); belt food-grade and specified for the product and washdown. Reject bin lockable so rejected product cannot be returned without authorisation; reject confirmation interlocked so the line stops if the reject fails.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts. Detection performance must be validated for your product and packaging.

Selection notes

Specify the fragment size you must detect, in your product, in your packaging — sensitivity quoted without those three is not a specification. Ask for a validation on your actual product rather than a test-piece figure. Check the reject mechanism against your line speed, because a detector that finds metal but cannot reject it is worse than useless. Confirm how rejects are logged and who can empty the bin.

When you should not buy this machine: If your packaging is metallised film or foil, standard metal detection will not work — you need X-ray inspection. Also skip it as a substitute for good practice: a detector is a control point, not a way to avoid maintaining knives, screens and belts.

Key specifications

Parameter Value
Capacity 500-8000 kg/h by belt width (TYPICAL, confirm with factory)
Detection sensitivity Product and aperture dependent, test required (TYPICAL)
Aperture size Sized to product height (TYPICAL)
Reject mechanism Air blast, pusher or belt drop (TYPICAL)
Belt width 200-600 mm by model (TYPICAL)
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

What size fragment can it detect?

It depends on aperture, product effect and metal type. Stainless is the hardest to find. The only meaningful number comes from a validation on your product in your packaging with test pieces of a known size.

Why does it false-reject?

Product effect or environment. Wet, salty or warm product produces signal; so does vibration from nearby equipment or a loose cable. Fix the mechanical and electrical environment before relaxing the sensitivity.

Does a detector replace knife and screen checks?

No. A detector is the last control point. Prevention — maintained blades, intact screens, disciplined engineering work — does the job that detection can only confirm.

Related equipment

This unit is one stage of a complete processing line. For the full range of sorting and grading equipment, or to compare this model against the Inspection and Sorting Conveyor 1500 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

General Produce, Root Vegetables, Berries

capacity

1–2 t/h

automation

Fully Automatic

grading_method

Detection (Metal)

Reviews

There are no reviews yet.

Be the first to review “Metal Detector Conveyor 2000 kg/h”

Your email address will not be published. Required fields are marked *