Steam Cooking Tunnel 2000 kg/h

Continuous steam tunnel that cooks or steams product on a belt in a saturated steam atmosphere, with lower product loss than a water blancher.

SKU: VL-055 Category: Tag:

Steam Cooking Tunnel

Steam cooking tunnel blanching vegetables on a continuous mesh belt

Continuous tunnel that cooks or steams product on a belt in a saturated steam atmosphere, giving a cook without immersing the product in water.

How it works

Product is spread evenly on a belt and carried through an enclosed tunnel into which saturated steam is injected. Steam condenses on the cold product surface, releasing latent heat directly into it — that phase change is what makes steam heating fast. Condensate drains away, and the product exits the tunnel cooked to the degree set by belt speed and steam supply. Tunnels are usually zoned so that steam can be applied harder at the entrance, where the product is coldest, and less toward the exit.

Because nothing is immersed, water-soluble solids stay in the product. That is the main reason to choose steam over a water blancher.

Suitable for

Vegetables where leaching into blanching water costs yield or nutrients; product that must stay relatively dry through the cook; root vegetables, leafy greens and beans before freezing or drying; cooking rather than blanching, where the product is meant to be fully cooked; lines where effluent from a water blancher is a problem.

Not suitable for

Product that needs the rapid, uniform heat penetration that immersion gives; irregular or matted product that steam cannot penetrate evenly; operations without steam capacity at the required rate; product where surface drying or case hardening is unacceptable.

Material & compliance

Tunnel, belt, steam manifold and condensate drains in SUS304 (EN 1.4301); tunnel insulated and sealed with steam traps and condensate handling designed for the duty. Belt specified for the temperature and the product; tunnel floor sloped and drainable.

Supplied with CE declaration of conformity and DoC on request; material certificate EN 10204 3.1 available for contact parts. Steam pipework carries the documentation required for the operating pressure.

Selection notes

Size on steam supply, not on belt area — a tunnel without enough steam is a warm box, and the constraint is usually the boiler, not the machine. Ask how steam is distributed across zones and how condensate is removed. Check belt loading: uniform, single-layer loading is what makes steam cooking even, and a heaped bed steams unevenly no matter how good the tunnel is.

When you should not buy this machine: If you do not have boiler capacity, this is the wrong choice — a water blancher will do more with less infrastructure. Also skip it for product that mats together: steam cannot reach into a clump, and matted product will cook on the outside and stay raw inside.

Key specifications

Parameter Value
Capacity 500-8000 kg/h by tunnel length (TYPICAL, confirm with factory)
Operating temperature 95-100 °C saturated steam (TYPICAL)
Residence time 1-10 min by product and load (TYPICAL)
Steam consumption Product and load dependent (TYPICAL)
Heating source Saturated steam (TYPICAL)
Contact material SUS304 (EN 1.4301)
Power supply 380V/3P/50Hz or 415V/3P/50Hz, customizable

Specification values are industry-typical ranges for this machine class and are not verified against a specific factory datasheet. Replace them with measured factory data before publication.

FAQ

Steam tunnel or water blancher — which is better?

Steam keeps water-soluble solids in the product and reduces effluent; water gives faster and more uniform heat penetration. Choose steam when yield or effluent matters, water when throughput and uniformity matter more.

Why does product leave the tunnel unevenly cooked?

Belt loading or bed depth. Steam cannot penetrate a matted or heaped layer. Spread the product in a single even layer before changing the belt speed.

Do I need to cool straight after?

If the cook must stop at a defined point, yes. Residual heat continues to act after the tunnel, so cooling — usually hydro cooling or forced air — is part of the process, not an optional extra.

Related equipment

This unit is one stage of a complete processing line. For the full range of cooking and blanching equipment, or to compare this model against the Continuous Belt Blancher 2500 kg/h, see the complete equipment catalogue. Capacity, material grade and utility requirements can be confirmed through a quote request.

material

SUS304 (EN 1.4301)

power

380V/3P/50Hz, Customizable

certification

CE+DoC (EU 2023/1230 ready)

surface_finish

Ra≤0.8 μm (food-grade)

application

Root Vegetables, General Produce, Leafy Greens

capacity

2–5 t/h

automation

Fully Automatic

heating_source

Steam

Reviews

There are no reviews yet.

Be the first to review “Steam Cooking Tunnel 2000 kg/h”

Your email address will not be published. Required fields are marked *